Manual

4. AttachthePulseSensor(114)totheHeadband(115).
Makesurethatthesensorwindowispressedthrough
theindicatedholeintheHeadband.
PreSsopentheclothes clip, and insert the pulse sensor
wire Into the clothes clip. Make sure that the pulse
sensor wire is resting against the hinge of the
clothes clip (see the Inset.drawing), "[he use ofthe
• oulse sensor is exolain_:l_r_ baoe 8. "
Sensor
Window
Pulse Sensor Wire
5. Remove the backing from the Adhesive Clip (90). Press
the Clip onto the Rear Roller Cover (82) in the indicated
location. Press the Alleri Wrench' tBg_intothe"Clio.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a mat
under the treadmill. For information on ordering a mat,
see REPLACEMENT PARTS on the back cover.
:J
7