User`s manual

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove the packing materials. Do not dis-

pose of the packing materials until assembly is completed. Assembly requires the Included allen wrench I .

__J

1. With the help of a second person, carefully turn the

treadmill onto its right side as shown.

Firmly slide a Base Extension (76) into one side of the

Base (86). Using the Allen Wrench (89), tighten an

Extension Bolt (13) into the Base Extension and the

Base.

Attach the other Base Extension (not shown) in the same

manner.

2. Attach six Base Pads (43) to the Base (86) and the Base

Extensions (76) in the indicated locations. Note: One

extra Base Pad may be included.

With the help of a second person, carefully raise the

treadmill to the upright position so the Base (86) and the

Base Extensions (76) are resting on the floor.

3. Hold the upper end of the treadmill with your right hand

as shown. Using your left thumb, slide open the storage

latch and hold it open. Pivot the treadmill until the frame

is past the storage latch.

76 \

.89

Opened