Specifications

JAROL Assumes the promotion of energy-saving technology as its own task!
69
Function
Function
Function
Function
code
code
code
code
Name
Name
Name
Name Setting
Setting
Setting
Setting range
range
range
range
F5.03
S 3 terminal
function
0~39 【 7 】
F5.04
S4 terminal
function
0~39 【 0 】
Function
Function
Function
Function
code
code
code
code
Name
Name
Name
Name Setting
Setting
Setting
Setting range
range
range
range
F5.05
S5 terminal
function
0~39 【 0 】
F5.06
S6 terminal
function
0~39 【 0 】
F5.07
S7 terminal
function
0~39 【 0 】
F5.08
HDI terminal
function
0~39 【 0 】
0 Invalid
Please set unused
terminals to be
invalid to avoid
malfunction
1 Forward
Please refer to
description of
F 5.10.
2 Reverse
3 3-wire control
Please refer to
description of
F 5.10.
4 Jog forward
Please refer to
description of
F 8.06~ F 8.08.
5 Jog reverse
6 Coast to stop
The inverter blocks
the output
immediately. The
motor coasts to
stop by its
mechanical inertia.
7 Reset fault
Resets faults that
have occurred. It
has the same
function as
STOP/RST.
8 Pause running
When this terminal
takes effect,
inverter
decelerates to stop
and save current
status, such as
PLC, traverse
frequency and
PID. When this
terminal takes no
effect, inverter
restores the status
9
External fault
input
Stop the inverter
and output an
alarm when a fault
occurs in a
peripheral device.
10 ： Up command （ UP ）
11 ： DOWN command （ DOWN ）
12 ： Clear UP/DOWN
The reference frequency of inverter can be
adjusted by UP command and DOWN command.
These three functions are used to modify the