Specifications

JAROL Assumes the promotion of energy-saving technology as its own task!

is .

DC braking time: The time used to perform DC

braking. If the time is 0, the DC braking will be

invalid.

Figure 6 .3 DC b rak ing d iagram .

Function

code

Name

Name Setting

Setting

Setting range

range

F1.11

Dead time of

FWD/REV

0.0~3600.0s

【 0.0s 】

S et the hold time at zero frequency in the

transition between forward and reverse running .

It is shown as following figure:

Figure 6. 4 FWD/REV dead time diagram.

Function

code

Name

Name Setting

Setting

Setting range

range

F1.12

Action when

running

frequency is

less than

lower

frequency limit

0~2 【 0 】

T his function code is used to define the running

state when the setting frequency is lower than the

lower frequency limit.

0: Running at the lower frequency limit: The

inverter runs at a frequency which is lower than

the lower frequency limit