Specifications

JAROL Assumes the promotion of energy-saving technology as its own task!
51
Select Frequency A command input channel and
there are 8 main given frequency channels.
0: Keypad : Please refer to description of F0.06
Set the frequency by keypad through modifying
F0.06.
1 : AI1
2: AI2
Set the frequency through analog input terminals.
JR6000 series inverters provide 2 ways analog
input terminal in its standard configuration, of
which AI1 is -10V~10V voltage input ； AI2 is
0~10V/0(4) ~20mA input. The current/voltage can
be shifted by J2.
Note:
Note:
Note:
Note: when
when
when
when AI2
AI2
AI2
AI2 selects
selects
selects
selects 0~20mA
0~20mA
0~20mA
0~20mA input,
input,
input,
input, 20mA
20mA
20mA
20mA
corresponds
corresponds
corresponds
corresponds to
to
to
to 5V.
5V.
5V.
5V.
100.0% of analog input corresponds to the Max.
Frequency (function code F 0.03), -100.0%
corresponds to the Max. Frequenxy in reverse
(function code F 0.03).
3: HDI
The reference frequency is set by high speed
pulse input. JR6000 series inverters provide 1 way
HDI input in its standard configuration.
Pulse specification: pulse voltage range 15~30V,
and pulse frequency range 0.0~50.0 kHz. 100% of
the setting inpluse corresponds to maximal
frequency, while -100% corresponds with minus
maximal frequency.
N
N
N
N ote:
ote:
ote:
ote: pulse
pulse
pulse
pulse can
can
can
can only
only
only
only be
be
be
be input
input
input
input through
through
through
through
multi-function
multi-function
multi-function
multi-function terminal
terminal
terminal
terminal HDI
HDI
HDI
HDI .
.
.
. A
A
A
A nd
nd
nd
nd set
set
set
set F
F
F
F 5.00=0
5.00=0
5.00=0
5.00=0 to
to
to
to
select
select
select
select the
the
the
the function
function
function
function of
of
of
of HDI
HDI
HDI
HDI as
as
as
as “
“
“
“ setting
setting
setting
setting input
input
input
input ”
”
”
” .
.
.
.
4. Simple PLC
T he inverter will run at simple PLC when selecting
this frequency setting method. I t is necessary to
set the parameter of F A group to determine the
given frequency, running direction and each
ACC/DEC time. P lease refer to the instruction of
FA group carefully.
5. Multi-stage speed
T he inverter will run at multi-stage speed when
selecting this frequeny setting method. The
reference frequency is determined by F5 and F A
group. I f F0 .0 7 is not multi-stage speed setting,
then the multi-stage setting has the priority which
is lower than the priority of jogging. O nly stage
1~15 can be set when multi-stage setting has the