Specifications

ManualsBrandsProForm ManualsOther7.2c

JiaXing Jarol Scientific Instrument Co.,Ltd － JR 6 000 series product s

Note

Note ： When

When

When the

the

the factory

factory

factory setting

setting

setting is

is restored,

restored,

restored, the

the

value

value of

of keypad

keypad

keypad and

and

and UP/DOWN

UP/DOWN

UP/DOWN will

will

will be

be cleared.

cleared.

Function

code

Name

Name Setting

Setting

Setting range

range

F0.0 3

Maximum

frequency

10.00 ~ 4 00.00 Hz

【 50.00Hz 】

T his parameter is used to set the Max. Output

frequency of the inverter. I t is the basic of

frequency setting and the speed of ACC/DEC.

Please apy attention to it.

Function

code

Name

Name Setting

Setting

Setting range

range

F0.0 4

Upper

frequency limit

F0.0 5 ~F0.0 3

【 50.00Hz 】

T his is the upper limit of the output frequency and

it will be less than or equal to the Max. Output

frequency.

Function

code

Name

Setting

range

F0.0 5

Lower

frequency

limit

0.00~F0.0 4

【 0.00Hz 】

T his is the lower limit of the output frequency of

the inverter.

T his parameter can be selected by function code

F 1.12 . If the setting frequency is lower thanthe

upper limit, the inverter will run, stop or hibernate

at the lower limit frequency. T he Max. Output

frequency ≥ Upper limit of the frequency ≥ Lower

limit of the frequency.

Function

code

Name

Setting

range

F0. 06

Keypad

setting

frequency

0.00~F0.0 3

【 5 0.00Hz 】

When Frequency A command source is set to be

Keypad , this parameter is the initial value of

inverter reference frequency .

Function

code

Name

Setting

range

F0.07

Frequency

command

source

0~7 【 0 】