Specifications

ManualsBrandsProForm ManualsOther7.2c

JiaXing Jarol Scientific Instrument Co.,Ltd － JR 6 000 series product s

5.2

5.2 Operation

Operation

Operation Process

Process

5.2.1

5.2.1 Parameter

Parameter

Parameter setting

setting

Three levels of menu are:



Function code group (first-level);

 Function code (second-level);

 Function code value (third-level).

Remarks:

Press either the PRG/ESC or the

DATA/ENT can return to the second- level

menu from the third- level menu. The

difference is: pressing DATA/ENT will save

the set parameters into the control panel,

and then return to the second- level menu

with shifting to the next function code

automatically; while pressing PRG/ESC

will directly return to the second-class

menu without saving the parameters, and

keep staying at the current function code.



This function code is not modifiable

parameter, such as actual detected parameter,

operation records and so on;



This function code is not modifiable in

running status, but modifiable in stop status.

5.2.2

5.2.2 Fault

Fault

Fault reset

reset

If fault occurs to the inverter , it will inform the

related fault information. User can use STOP/RST

or according terminals determined by F5 Group to

reset the fault. After fault reset, the inverter is in

stand-by state. If user does not reset the inverter

when it is in fault state, the inverter will be in

operation protection state, and can not run.

5.2.3Motor

5.2.3Motor parameter

parameter

parameter s

autotuning

Input right nameplate parameter of the motor

before the running of the inverter. JR6000 series

inverter matches the standard motor parameter

according to the nameplate. JR6000 series

inverter support parameter autotune to improve

the control perfprmance.

The procedure of motor parameter autotuning is

as follows:

Firstly, choose the keypad command channel as

the operation command channel ( F 0.01).