Specifications

JiaXing Jarol Scientific Instrument Co.,Ltd － JR 6 000 series product s
116
Value
Value
Value
Value Name
Name
Name
Name Mean
Mean
Mean
Mean
allowed. 1 T he data to write exceed the range of according parameter
2 The parameter should not be modified now.
3 The terminal has already been used.
13H System locked
When password protection take effect and user does not unlock it,
write/read the function parameter will return this error.
Protocol data unit format of writing single parameter:
Request format:
Protocol
Protocol
Protocol
Protocol data
data
data
data unit
unit
unit
unit Data
Data
Data
Data length(bytes)
length(bytes)
length(bytes)
length(bytes) Range
Range
Range
Range
Command 1 0x06
Data Address 2 0~0xFFFF
Write Content 2 0~0xFFFF
Reply format (success):
Protocol
Protocol
Protocol
Protocol data
data
data
data unit
unit
unit
unit Data
Data
Data
Data length(bytes)
length(bytes)
length(bytes)
length(bytes) Range
Range
Range
Range
Command 1 0x06
Data Address 2 0~0xFFFF
Write Content 2 0~0xFFFF
If the operation fails, the inverter will reply a message formed by failure command and error code. The
failure command is (Command ＋ 0x80). The error code indicate s the reason of the error; see table 1.
7
7
7
7 .5
.5
.5
.5 Note:
Note:
Note:
Note:
9.5.1 Between frames, the span should not less than 3.5 bytes interval, otherwise, the message will be