User`s manual

9
7. Identify the Left and Right Handlebars (119,
120), which are marked with “Left” and
“Right” stickers, and orient them as shown.
Tip: Avoid pinching the Pulse Wires
(
118). Attach the Left and Right Handlebars
(119, 120) to the Upright (3) with two M8 x
80mm Patch Bolts (116) and two M8 Jam
Nuts (79).
79
118
118
120
119
1
16
116
7
Avoid pinching
the wires
8. Insert the Pulse Wires (118) upward through
the Upright (3) as shown.
8
3
3
118
118
9
9. While a second person holds the Console
(5) near the Upright (3), connect the wires
on the Console to the Upper Wire Harness
(48) and to the Pulse Wires (118).
Insert the excess wire into the Upright (3) or
into the Console (5).
Tip: Avoid pinching the wires. Attach the
Console (5) to the Upright (3) with four M4 x
16mm Round Head Screws (101).
5
118
48
101
3
Avoid pinching
the wires