User`s manual

nspect and tighten all parts of the elliptical regularly.

Replace any worn parts immediately.

To clean the elliptical, use a damp cloth and a small

amount of mild soap. IMPORTANT: To avoid damage

to the console, keep liquids away from the con-

sole and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console does not turn on, make sure that the

power adapter is fully plugged in.

If the console displays become dim when batteries are

installed in the console, replace all the batteries at the

same time; most console problems are the result of

low batteries. See assembly step 17 on page 13 for

replacement instructions.

If the handgrip pulse sensor does not function prop-

erly, see step 5 on page 18.

OW TO LEVEL THE ELLIPTICAL

f the elliptical rocks slightly on your floor during use,

turn one or both of the leveling feet beneath the rear

stabilizer until the rocking motion is eliminated.

HOW TO ELIMINATE FLEXING IN THE CENTER OF

THE ELLIPTICAL

If the elliptical flexes in the center during use, turn the

base foot (see the drawing above) until the flexing is

eliminated.

MAINTENANCE AND TROUBLESHOOTING

Leveling

Feet

Base

Foot