User`s manual

12
14
15
13
14
104
104
112
102
102
112
108
14. Identify the Left Pedal (13) and the Left
Pedal Arm (14), which are marked with
“Left” stickers.
Attach the Left Pedal (13) to the Left Pedal
A
rm (14) with an M4 x 50mm Screw (108),
three M4 x 16mm Blunt Screws (104), four
M4 Split Washers (112), and four M4
Washers (102).
Attach the Right Pedal (not shown) to
the Right Pedal Arm (not shown) in the
same way.
15. Apply a small amount of grease to one of
the Pedal Arm Axles (32).
Next, slide an M8 Washer (88) and a Pedal
Arm Cover (31) onto an M8 x 23mm
Shoulder Patch Screw (115), and turn the
Shoulder Screw a few turns into the Pedal
Arm Axle (32).
While a second person holds the front end
of the Left Pedal Arm (14) inside the
bracket on the Left Upper Body Leg (11),
insert the Pedal Arm Axle (32) into both
parts.
Slide an M8 Washer (88) and a Pedal Arm
Cover (31) onto another M8 x 23mm
Shoulder Patch Screw (115), and turn the
Shoulder Screw a few turns into the Pedal
Arm Axle. Tighten both Shoulder Screws
at the same time.
Repeat this step to attach the Right
Pedal Arm (not shown) to the Right
Upper Body Leg (12).
Grease
115
32
88
31
12
11
14
88
115
31