System information

Denyaddr: because the server will try to send the sip messages to all possibile addresses, sometime it will missroute. With this setting you can restrict the address
posibilities. Check the FAQ for more details.
sendfakealert: used for gsm gateways. Specifies the timeout in sec after that the gsm gateway will send an alert to voip even if no ringing have b
een received from gsm
network. Set to 0 or -1 to disable. Gsm gateway settings will overwrite the traffic sender settings if is not set to -1
sendsmsalert: use for support and admin acounts. Will send sms notification to the configured “phone” when a critical error occurs
sendemailalert: use for support and admin acounts. Will send email notification to the configured “email” when a critical error occurs
sendsmsreport: daily sms report for support and admins
senddailyemail: daily email report for support and admins
convertdtmf: applicable for sipproxy users
-0: DTMF messages will be forwarded as received from client
-1: INFO and RTP DTMF messages will be converted to InBand
-2: INFO and RTP DTMF messages will be forwarded and converted to InBand too.
-9: don’t forward INFO
sendmonthlyemail: monthly email report for support and admins
Missed by SMS: notify about missed calls by sms. Usually used for endusers
Missed by Email: notify about missed calls by email. Usually used for endusers
Can watch sim packets: list of packetid separated by comma, used for VPC access. The actual partner can see this simpackets with his VPC account
Can watch users/devices: list of users and gateways id separated by comma, used for VPC access. The actual partner can see this devices with his VPC account
Access Rights: specify wich fields are allowed for the user in the VPC application
0: simcard and traffic sender fields are not shown
1: simcard related fields are not shown (simid, packetname)
2: traffic sender related fields are not shown (name, username)
3: all fields are shown
CLI: CLIR and CLIP settings
0: forward always (forward asserted as normal number always!). will not hide, even if caller was set so
1: normal handling (forward asserted as normal number) -default
2: forward as asserted identity always (identityrewrite asserted)
3: forward as asserted identity only to trusted domains (identityrewrite asserted)
4: normal hide (no idenityrewrite forwarding)
5: force hide (no asserted identity too!). always hided
IsOperator: specify if the user is a callcenter operator (1) or a sub-enduser (0) or power enduser (2)
Choosecodecs: list of supported rtp payload formats in priority order separated by comma. Only one will be selected. Don’t set this field to disable