System information

The most common reason codes are the followings:
-SIP, Bye: normal SIP close code
-SIP, CANCEL: the call was canceled by the caller (not connected call)
-H323, Remote endpoint application cleared call: normal H323 disconnect
-H323, Remote endpoint stopped calling: the call was canceled by the caller (not connected call)
-GSM, Normal call clearing: normal GSM close code
-GSM, Normal unspecified: normal GSM close code
-Server, Blacklisted: dropped due to ACL (blacklist)
-Wrong Media: no voice activity detected.
4.2.6. Line Monitor
This is a simple listing of your channels. You can discover all simcard problems by scrolling down this list. (Missing channels are highlighted)
4.2.7. Capacity Check
This module tests the capacity for the predefined direction in priority order.
4.2.8. System Load
Shows system utilization statistics.
4.2.9. Server Console
Direct interface to the server command port. Type help to see the available commands. You can connect directly to any gateway interface.
Command defined on gateway interface:
help show this command list
info show status and important parameters
cmd launch the predefined process
exec launch the predefined process
file will send the requested file
showlog will send the last lines from the requested file
timeset will sent the current time
setini write to config file
getini read from config file
dtmf send dtmf
ftpget load from ftp
ftpput put file to ftp
selfupgrade do a selfupgrade