System information

16. allocate numbers in the mainserver for the new virtserver instance (callback numbers)
17. start the new virtual server
18. make a testcall
19. check the logfile for errors. test MAgent. check MManage
5.68. Fax detection
Usually you can filter out fax calls by setting the “block711” global setting.
5.68. Handling dynamic & private ip/port
For sip proxyes, endusers and gsm gateways the server will handle ip and port changes automatically. For sip proxyes and endusers the
ip/port/transip/transport settings will be changed dynamically only if the “Can Dial” option is enabled for the device.
5.69. Fax settings
faxhost: email-fax gateway domain name or ip
faxuser: smtp username
faxsubject: email subject
faxfromaddr: from field
faxfromname: from name field
faxnormalize:
0 = leave original number
1=normalize
2=normalize, no iec
3=normalize, with iec
faxsuffix: append after faxnumber (usually @host.domain)
5.70. License limitations
You can configure the limits in the “licensecfg” global config section, but the configured values cannot exceed the builtin hardlimits. Most of builtin
hardlimits are listed in the “license” section or you can check them in MManage->help->licensing menu. The -1 value means “no limit”.
When the software has no builtin and configured limits, than only the hardware can restrict its performance and throughput.
The following hard limits are built in the software: