System information

flyto=ip/engine/simpos/simid //template
flyto=local/local/2/999999 //local simpos
flyto=local/2/2/99999999 //other engine
flyto=1.1.1.1/2/3/99999999 //other gateway
flyto=manual //after manual timetable
flyto=off //switch off
tb_sims
origgatewayid: original gateway for the simcard
origline: original engine for the simcard
origsimpos: original position for the simcard
presenterrors: simcard activation fail count (increased in every 10 min if sim is not active when should be active)
preserrreset: presenterrors will be reseted several times to retry the simcard
flyetosim (e): the engine must be bound to the required simcard ?
currflydeep: gateway count from the original gateway
flystarted: time of flying start
staystarted: time of stay start
todayfly: elapsed flying minutes today
thisweekfly: elapsed flying minutes in the current week
thismonthfly: elapsed flying minutes in the current month
4.12.11. H.323
The mizu voip server is capable to handle H.323-H.323 routing or transparent sip to H.323or H.323 to sip conversion.
Both Gateway and Gatekeeper (v.1,2,3,4) mode are enabled and protocol variations are handled automatically (RAS, H.245, H.225, media proxy or bypass,
Fast Connect/Fast Start, etc)
H.323 should be used only for gateways. For endusers you should always prefer SIP over H323 because:
-some class 5 features will work only with SIP protocol
-H323 GK doesn’t support username/password authentication (only ip/port and/or techprefix based)
Files needed (part of the install package):
 atarongk.exe -main h323 gateway and gatekeeper
 vsip.exe -for SIP to H323 conversion (will not be used for H323 to H323 calls)
 openh323.dll, ptlib.dll, pwlib.dll, libyate.dll -required dll's
 sipcfg directory and sipunits directory -required for sip to h323 converter (vsip.exe)
To enable h323 the hash323 and can_h323 global config values must be set to true.