System information

- Waituntillconnected: if set to false, than will dropp started call when no more operator waiting (no more "No free operator on predective"
disconnect reason)
4.9.12. Outgoing callback
There are two types of callbacks:
1. operator set Recall (1) manually
2. server receive an incoming call and set to Callback (2) automatically
Client records will be marked when callbacks or recalls are needed. The following values are defined for the „needrecall” field:
-0: not set
-1: recall set by operator
-2: callback set because incoming call
-4: recalled
-5: callback completed
Callbak numbers:
Special A numbers are the followings:
- callbacknumber
- predective dialer number
- identityrewrite number for outgoing proxy
these should be set to the same number. By default it is loaded from „callbacknumber” global setting
*if the callbacknumber is not set, the predictive dialer will use “1111” by default
* identityrwmode global setting should be set to 1 for callcenters
*if the CLI is hided, than there will be NO incoming calls,
to enable CLIP you must set the “identityrwmode” setting to 1 or set the CLI for users to 1
The „callbackhandling” global setting will determine how incoming calls to callbacknumber will be handled. Incoming calls when the caller is not found in
any campaign will be inserted to the client table with a name set to “unknown callback”.
Make sure to setup the callback number on the main server to be routed to the actual virtual server! (check faq)
4.9.13. Incoming calls
Incoming calls can be handled in different ways:
1. Simple distribution across operators