System information

MAXPCRESTARTIVAL=
//max time to wait for watchdog reset. defaults to 1000*60*20 msec
MUSTRECEIVEOKIVAL=
4.8.5. Other settings
//at commands sent only once for all engines
[atonce]
#hardware version
cmd0=AT+WHWV
#sw version
cmd1=AT+WSSW
//at commands sent for all engine at every init
[atinit]
##cmd0=XXXX
##cmd1=XXXX
##etc
//prefix depending settings
[prefXXX]
connectwithmedia=0
g723frames=3
g729frames=6
[ipmux]
ipmuxenabled=0/1
[sounddevices]
//will be filled when reading all sims, so you can copy device names from here
4.8.6. Handling incoming calls from GSM network
Depending on the “incalls” (gateway configuration) settings, incoming calls from gsm network can be handled in several ways.
1. When incalls is set to 0
-all incoming calls to gsm simcards will be dropped immediately
2. When incalls is set to 1
-the engine will pickup the call, hold a little (random time, but maximum 1 minute), and than drop. Also used in call simulations.