System information

o Ring a phone number
o Restart the VoIP service
o Restart the SQL service
o Reboot the server
4.8. Gateway Configuration
Skip this section if you are not using VoIP-GSM gateways.
All configurations can be done from the MManage Client Utility GUI and the VnetCfg utility.
For better understandings we present the gateway configuration settings here:
4.8.1. Phone Settings
[PhoneX]
//serial port
PortNumber=1
//control port (not used in 1.6 hardware)
ModemControllPort=X
//if there are no "In" and "Out" device, we use this settings both for in and out
##AudioDevice="Xaaaaaa"
//from engine
AudioDeviceIn="1Audio Codec 1000"
//to engine
AudioDeviceOut="2Audio Codec 1000"
//simchange settings
simchange1= 00:00:00 - 00:00:00 - 01234567890123456789
//if 1 then the conversations (voice) will be saved to files on encrypted, compressed format
record=0
//init commands only for this engine: atinit1,atinit2 ... atinit19
##atinit1=XXXX
##atinit2=XXXX
##etc
//simcard id's in the slots
simcard0=01234567890123456789
simcard1=
simcard2=