System information

settings
checkcallerids
wich calls are to be checked on the selfcheck thread (useful if you have wrong traffic senders)
settings
checkcputime
if cputime is constantly high
settings
checkcredirights
if to check the owner of the sim and chargecards
settings
checkgkcdrs
if to check cdr records from the gk statusport
settings
checkgsmnumlen
if to allow incoming number only with this size
settings
checkknownnumbersex
0 = no
settings
checklocalnumberpx
local endusers prefix to check (to not route to other servers). if emty
settings
checklocalnumbers
check local endusers on routing
settings
checkmaxlines
check max used lines to client and partner
settings
checkmaxlinetb
extended check for max lines (tb_maxlinep)
settings
checkmaxnumlen
max called number length allowed
settings
checkminnumlen
min called number length allowed
settings
checknumlen
if to check the incoming number len //14
settings
checknumport
check number portability
settings
checknumportpx
check number portability for this prefixes
settings
checkpacketfailowering
0=don't check
settings
checkprefixes
check asr/acd for alerting and wachdog only for this prefixes. must be in the following format: 'xxx'
settings
checkprefixroules
set to 1 to check additional prefix rules. by default only H323 ip prefix rules are applied
settings
checkrouterrights
callprefixrights and partner binding
settings
checksss
check special numbers
settings
connectondisccode
if to connect the sipcall before to play the disconnect reason. 0=not connect
settings
country
used in number normalizations
settings
countryprefix
used on routing
settings
creditcheckforpostp
check credit for postpaid users too (max limit)
settings
creditcheckforts
check credit for traffic senders too
settings
currency
local currency
settings
dailymainttaskhour
when to perform daily maintenance tasks
settings
dbdelbackupdir1
additional backup directory to cleenup
settings
dbdelbackupdir2
additional backup directory to cleenup
settings
dbdelbackupdir3
additional backup directory to cleenup
settings
dbloglevel
db server loglevel (0=only errors to monitor