System information

Note: dialing, ringing and call ending messages may not be shown in the monitor depending from the gsm gateway configuration.
If the “sendallstatus” setting is set to false, than instead of “dialing” and “ringing” only the “speaking” message will be shown.
4.6.6. Credits
For Identification of sms and dtmf messages received from simcards that are useful for credit request and charge
Type: 0=other, 1=succ charge without credit info,2=credit start/end, 3=failed charge, 4=need charge
Msgbgn: begins with
Msgeng: ends with -used if type is 0 (replace) or 2 (end of credit), 4 (new credit. usually 0)
Priority: check order (longer messages usually first, to not include shorter) –higher values first
4.6.7. SIM Distribution
All simslots are listed here.
Probability values:
not sure: the simcards was seen more than one month
probably: the simcards in the last month
sure: the simcards in the last week
The other fields are the same as described in section 4.2.2.
4.6.8. SIM Utilization
List of simcards in call duration order.
4.6.9. New Simcard
You can add new simcards by using this form.
However, the simcards are usually added automatically. If they are active in the gateway they will register automatically. Usually only the owner and the
packet must be set manually.
4.6.10. New Charge Card
Add new chargecards with this form.
The charge card will be charged only on the simpackets selected (“packets for”) and if the owner will match.