User`s manual

4. With the help of a second person, carefully raise the

Upright (96) to the vertical position.

Remove the two Latch Screws (109) from the Left

Upright (96). Attach the Latch Assembly (110) to the Left

Upright with the two Latch Screws. Be careful not to

overtighten the Screws.

110

109

3. Attach the four Base Pads (125) with the four 1” Tek

Screws (123) to the bottom of the Upright (96) in the lo-

cations shown.

Note: One replacement Base Pad (125) may be in-

cluded. If a Base Pad becomes worn and needs to be re-

placed, use the replacement Base Pad.

125

123

2. With the help of a second person, carefully lower the

Uprights (96) as shown. Note: It may be helpful to place

your foot on one of the Wheels (94) as you tip the

prights.

ake sure that the Extension Legs (86) re-

main in the Uprights.

Attach each Extension Leg (86) with two 1/4” x 1” Bolts

(88) and 1/4” Star Washers (87) as shown.

123

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your right hand

as shown. Using your left hand, pull the latch knob to the

left and hold it. Pivot the treadmill down until the frame is

past the latch pin. Slowly release the latch knob.

2. Hold the treadmill firmly with both hands, and lower the

treadmill to the floor. To decrease the possibility of in-

jury, bend your legs and keep your back straight.

Latch

Knob

Catch

Open