User`s manual

8
5. The Console (4) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents. Remove the battery cover, insert the
batteries into the battery compartment, and then
reattach the battery cover. Make sure to orient
the batteries as shown by the diagram
inside the battery compartment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter. Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
5
4
Batteries
Batteries
Cover
6
6. While another person holds the Console (4)
near the Console Bracket (3), connect the con-
sole wire to the Wire Harness (86).
Then, insert the console pulse wires downward
through the Upright (2). Pull a console pulse
wire outward from each side of the Upright.
Tip: Avoid pinching the wires. Attach the
Console (4) to the Upright (2) with four M4 x
16mm Round Head Screws (84).
4
3
84
2
84
86
Console Wire
Pulse Wires
Avoid pinching
the wires