User`s manual

7
4. Slide the Console Cover (96) onto the Upright
(2) and move it downward.
Orient the Console Bracket (3) so that the stick-
er faces upward. Then, hold the Console
Bracket near the Upright (2) and insert the Wire
Harness (86) upward through the Console
Bracket.
Tip: Avoid pinching the Wire Harness (86).
Attach the Console Bracket (3) to the Upright
(2) with four M4 x 16mm Flat Head Screws
(73).
4
3
. Have another person hold the Upright (2) near
the Frame (1).
Locate the wire tie in the Upright (2). Tie the
l
ower end of the wire tie to the Wire Harness
(86). Next, pull the upper end of the wire tie
u
pward out of the top of the Upright. Then, untie
and discard the wire tie.
Tip: To prevent the Wire Harness (86) from
falling inside the Upright (2), secure the Wire
Harness with a rubber band.
Tip: Avoid pinching the Wire Harness (86).
Attach the Upright (2) to the Frame (1) with four
M10 x 20mm Patch Screws (79) and four M10
Split Washers (78). Do not tighten the Patch
Screws yet.
3
A
void pinching the
Wire Harness (86)
Avoid pinching the
Wire Harness (86)
2
1
86
78
78
78
79
79
79
73
73
86
96
Wire Tie
2
3