User`s manual

11
11
11. Using a plastic bag to keep your fingers clean,
apply a generous amount of the included grease
to the axle on the right side of the Upright (2).
Next, orient an Axle Spacer (84) as shown, and
slide it onto the Upright (2).
Then, slide the Right Upper Body Arm (9) onto
the Upright (2).
Attach the Right Upper Body Arm (9) with an M8
x 20mm Screw (80) and an M8 Washer (33).
Repeat this step on the other side of the
elliptical.
9
33
80
84
31
31
76
76
6
49
Grease
8
2
Grease
12
12. Apply a small amount of grease to a Bolt Set
(31).
Hold the end of the Right Pedal Arm (49) inside
the bracket on the right Upper Body Leg (6).
Attach the right Upper Body Leg (6) to the Right
Pedal Arm (49) with the Bolt Set (31).
Repeat this step on the other side of the
elliptical.
Tighten the M8 x 45mm Bolts (76).