Owner`s manual

Failuretorealignthebeltcouldresultintearingorfrayingofthebelt,whichisnot

coveredinthewarranty.Pleasefollowtheadjustmentprocedurelistedbelow:

1.Turnonthepowerswitchlocatedonthefrontofmachine.PlacetheSAFETYKEY

onthe"SAFETYKEY"position.

2.PresstheSPEED(keytoincreasethespeeduntilthespeedregisters2.0mph/

3.2kphonthedigitaldisplay.

3.Whiletheunitisrunningat2mph/3.2kph,determinewherethebeltisin

relationtothebeltalignmentgauge.

4.Shouldyourbeltbeinthewrongcolorrange,followthestepsbelowtoreturnthe

belttothe"safetyzone":

5.Ifthebeltisintheleftredzone:Turntheleftbeltadjustmentboltlocatedatthe

rearofthetreadmillclockwise1/4turnatatime,usingthehexAllenwrench.Then

turntherightbeltadjustmentboltcounterclockwise1/4turn.Letthetreadmillrun

30seconds,thencheckthepositionofthebeltinthecolorgauge.Ifthebeltstill

hasnotreturnedtothegreensafetyzone,repeatwithanother1/4turnuntilthe

belthasreturnedtothemiddleofthegreenarea.Donotturnadjustingboltmore

than1/4turnatatime.

Ifthebeltisontheedgeofthegreencolor,pleaseadjustitsoitisinthemiddleof

thegreencolor.Youmayturntheadjustmentnutlessthan1/4turnatatime.

6.Conversely,ifthebeltisintherightredzone,turntherightbeltadjustmentnut

clockwise1/4turn,thenturntheleftadjustmentboltcounterclockwise1/4turn.

Thenletthetreadmillrunatleast30seconds,checkthepositionofthebeltinthe

colorgauge.Ifitstillhasnotreturnedtothegreensafetyzone,repeatwith

another1/4turnuntilthebelthasreturntothemiddleofthegreenarea.Donot

turnadjustingboltmorethan1/4turnatatime.

7.Whenthebeltisbackinthegreen"safetyzone",youcancontinueyourregular

useofthetreadmill.Slowlyincreasethespeedoftheunitto5.5MPH(9KPH),

andletitrunforatleast45seconds.