Owner's Manual

10. Be careful not to pinch the wires in the Right

Handrail (7).

Attach the console assembly to the Right

andrail (7) with two #8 x 3/4" Screws (1), a

1/4" x 1 1/4" Bolt (6), and a 1/4" Star Washer

(10). Repeat this step on the left side of the

console assembly. Start all four Screws and

oth Bolts before tightening any of them.

See steps 4 and 6–8. Tighten all the bolts

used in these assembly steps.

Console Assembly

11. If necessary, press the Left Accessory Tray (94)

and the Right Accessory Tray (99) into the con-

sole assembly.

Console

Assembly