Owner's Manual

6
1.
Identify and orient the Front Stabilizer (3) as
shown.
W
hile a second person lifts the Frame (1),
attach the Front Stabilizer (3) to the Frame with
two M10 x 80mm Patch Screws (100) and two
M10 Split Washers (123).
2. Identify and orient the Rear Stabilizer (4) as
shown.
While a second person lifts the Folding Frame
(2), attach the Rear Stabilizer (4) to the Folding
Frame with two M10 x 80mm Patch Screws
(100) and two M10 Split Washers (123).
1
2
To make assembly easier, read the
i
nformation on page 5 before you begin.
3
1
2
4
100
123
123
100