USERS MANUAL TX-168PHB
DECLARATION OF NETWORKCOMPATIBILITY The Profoon TX-168PHB is designed for use on the ‘public switched telephone networks (analogue single-line)’ of telephone- and cable-companies inside the Benelux. Each country and/or provider might require a different telephoneplug. The Profoon TX-168PHB complies with the essential requirements and provisions as described in the European Directive 1999/5/EC. The function Caller-ID is based on both the DTMF and the FSK system (automatic detection).
INSTALLATION Power supply: The TX-168PHB needs power to operate. Use the included power adaptor or install 4x 1,5 Volt battery, size AAA. Power adaptor: One power adaptor is included. Use this one or a version with the following specifications: input: 230 Volt, 50, Hz AC output: 6 - 9 Volt DC, 200mA, Batteries: open the battery compartment (direct below the handset) and install 4 pcs 1.5V AAA batteries. Mind the polarity. Batteries are not included.
ADJUSTING Language: 1. press MENU 4 times, the display indicates “TAAL” (= language) 2. press YES, the display gives “NEDERLANDS” (= Dutch) 3. use or to select “ENGLISH” 4. press YES Time: 1. press MENU 2 times, the display indicates “CLOCK” 2. press YES, the hour indication starts to blink 3. use and to adjust the hours and press YES, the minute indication starts to blink 4. repeat this procedure for the month and the date 5. press BACK to finish the adjusting Contrast: 1.
HOW TO USE Incoming call: Adjust the ringer volume with the ringer switch on the backside of the telephone. Lift the handset and start the conversation. Outgoing call: Lift the handset. Wait for the dial tone and key-in the desired telephone number. Handsfree dialing: 1. press the button HANDSFREE to switch-ON the handsfree mode; the dialtone is heard through the built-in loudspeaker and can be controlled by the slider on the right side 2. key-in the desired telephonenumber 3.
Teleservices: Buttons and # are functionbuttons, needed for divers telecom-services (teleshopping, telebanking, etc) or to control divers telecom devices (PABX, answering machines, etc). Refer to the concerning manual. Calltimer: As soon as the handset is lifted or the speakerbutton is pressed, the calltimer keeps track of the call time.
MEMORY The TX-168PHB has a memory capacity of 37 names and numbers: * Each name can be as long as 15 characters. * Each number can be as long as 16 digits. * 2 Memory locations are one-touch memories; use them for emergency numbers. * The remaining 35 memory locations are accessible through the phonebookmenu. * See chapter Pause on page 4 in case a dialpause is required. * It is possible to copy numbers, received by the TX-168PHB’s Caller-ID, into the dialmemory.
Dialing phonebook memories: 1. leave the handset on the telephone 2. press MENU, the display indicates “PHONE BOOK” 3. press YES, the display gives “NAME ?” 4. use and to step through the phonebook 5. press, when he required name is on the display, the speakerbutton to dial the number 6. as soon as the called party answers the call, you have to lift the handset to start the conversation Attention: the dialing of a phonebook entry can only be done in handsfree mode (see above instruction 5).
CALLER-ID Functioning: Together with the first ring, the Telephone Company sends the telephonenumber of the person who is calling to you. This can also be the telephonenumber of a fax or of a mobile phone. On receipt of this information, the display of the TX-168PHB shows this number and stores it into its memory. Because the numbers are stored in memory, at any time you can see who called you and at what time and day.
Read the memory: Press or to start reading. Use buttons or to step through the memory. Next to “CALL#”, the rotation number of that call is displayed. The lower part of the display gives the time and date of that call. Call back: 1. leave the handset on the cradle and use or to look for the number to be dialed 2. as soon as the required number is on the display, press YES; the number will be dialed 3. you may now lift the handset to start the conversation Erase specific numbers: 1.
TIPS & REMARKS Batteries: In case the battery-LO indication lights, the batteries have to be replaced. When the batteries need to be replaced, act as follow: 1. disconnect the telephone from the telephone outlet 2. press key MENU 5 times, the display shows “REPLACE BATT” 3. press YES, the display shows “SYSTEM HALT” 4. replace the batteries within ONE minute 5. press MENU until the display gives the time/date 6.
MAINTENANCE Do not locate the telephone in direct sunlight or in a moist environment. Never use chemical cleansers to clean the cabinet, the cabinet may only be cleaned with a moist cloth. Don't place the TX-168PHB on furniture with cellulose based coating; the rubber feet will leave stains on the cellulose. Under certain circumstances the sound of the TX-168PHB might be influenced by electromagnetic fields of electronic devices like TV, computer or radio transmitters close to the telephone.
GUARANTEE CARD CUSTOMER: Name: Address: Zip-code: City: Telephone: attach here your purchase ticket You have a guarantee of 12 MONTHS after the date of purchase of this Telephone. We guarantee during this period the free repair of defects caused by material- and construction faults. This at the importers discretion. It is only possible to claim to the guarantee when you enclose your purchase ticket with the TX-168PHB. HOW TO ACT: If you notice a defect, consult the manual first.
