USER 'S MANUAL TX-255
TABLE OF CONTENTS FEATURE LIST 1 SAFETY INSTRUCTIONS 2 INTRODUCTION 3 LOCATION OF CONTROLS 4 INSTALL THE BRACKET 6 FUNCTION BUTTONS 7 FUNCTION OPERATIONS 10 RECEIVING CALL RECORDS 15 REVIEWING DISPLAY MESSAGES 15 CALLER ID SYSTEM OPERATIONS 17 TROUBLESHOOTING 19
FEATURE LIST 1. FSK and DTMF dual system Caller ID 2. Stores minimum 76 incoming calls name & number, date & time 3. Stores up to 10 outgoing calls number 4. Stores up to 70 names & numbers in phone book 5. LCD displays calling name and number 6. Call back function 7. Delete individual or all records 8. Real time clock (Set time) 9. New call indicator 10. Area & long distance code setting 11. Languages selection 12. Message waiting function 13. Last number redial 14. Speakerphone 15.
SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, and injury, please follow these basic safety precautions before you use this equipment. 1. Carefully read the instructions in this manual. 2. Follow all warnings and instructions marked on the unit. 3. When cleaning, unplug the telephone jack from the wall outlet. Use a damp cloth. DO NOT use liquid or aerosol cleaners. 4.
l Using the call back feature(NOTE: If the number is blocked or is not available, it can not be call backed.) A. Call back the dialled number: The unit can store up to 10 dialled numbers. 1. In the state of on-hook, press the button once, the last dialled number will show on the LCD, then use the or button to select the number that you want to dial out. 2. Pick up the handset or press button, the phone number can be dialled out automatically.
CALLER ID SYSTEM OPERATIONS LOCATION OF CONTROLS Subscription to Caller ID service from your local phone company is required before the first use. 2 l 1 3 4 M1 M2 17 M3 DEL FLASH AUTO 5 6 MUTE 7 16 8 1 GHI 4 ABC 2 DEF 3 JKL 5 MNO 6 9 10 PQRS 7 TUV 8 WXYZ 9 0 VOL RD./P 15 1. Handset 2. LCD 3. M1~M3 button 4. Flash button 5. Auto button 6. Mute button 7. Call back ( ) button 8. Down ( ) button 9. New call indicator VOL 14 13 12 11 10. Up ( ) button 11.
NO CALLS - When all calls have been deleted. The LCD will show NO CALL. 9:52 9/12 TOTAL & NEW CALLS - This shows you the total and new calls to be reviewed. In this example, you have a total of 4 calls which include 2 new calls and it is MONDAY. 9:52 9/12 PRIVATE - If the caller has exercised the option to prevent his name and number from being sent, PRIVATE will show on the screen. REPEAT CALLS - If a call comes repeatedly, the display will show REPEAT icon in the upper right corner of the LCD.
INSTALL THE BRACKET RECEIVING CALL RECORDS 1. If you would like to put your phone on the desktop, please install the bracket as figure 1. A caller ID record consists of the following information: 9:52 9/12 2. If you prefer to mount the phone on the wall, please do the following steps and see figure 2. a. Install the two self-tapping screws (not supplied) at a distance of 83mm from each other and located on a vertical centre line. b. Slowly slide the unit down until it snaps into place.
6. FLASH TIME SETTING Press the button to enter this setting when the LCD shows SET FLASH and then the current value will display. Use the button to set the flash time (100ms/120ms/300ms/ or 600ms). Press the button to confirm and exit. 7. HOUR FORMAT SELECTION Press the button to enter this setting when the LCD shows HOUR FORMAT and then the current value will display. Use the button to select the hour format (12H/24H). Press or the button to confirm and exit. 8.
entry without a pause between the prefix numbers. You may have to dial 011- RD./P, dial 886 - RD./P. This allows adequate timing for the phone number to register with the telephone company's system and complete the call. 7. Memory Dialling A. Two-touch memory l To store a number in two-touch memory You can store 10 numbers in two-touch memory in the state of on-hook, Press and hold the AUTO button until the LCD shows - - >. Then enter the telephone number you want to store.
e. To delete a single number in the phone book: or During the reviewing process, use button to select the number you want to delete, press the DEL button once, the LCD shows DEL? Press the DEL button again to delete it. f. To copy the Caller ID numbers and last 10 dialled numbers to phonebook When the LCD shows the CID or last 10 dialled number, press and hold button for about 3 seconds to add the number to phonebook.
FUNCTION FUNCTION OPERATIONS OPERATION This unit contains the following special function, quickly press the DEL button twice to enter the setting mode and press or button to select one. The setting sequence is PHONE BOOK-LCD CONTRAST SET TIME - SET LANGUAGE - SET AREA& LDS - SET FLASH - HOUR FORMAT- DATE FORMAT. Press the button to confirm or press the DEL button to exit. 1. PHONE BOOK a. To add number and name to the phone book Key 1 Characters 1.
