Datasheet

Registration
Up to 4 cordless handsets can be registered to one base.
1. Press
key.
2. Press ▲ or ▼ key to select “REGISTRATION” and
press
key.
3. Press ▲ or ▼ key to select “REGISTER” and press
key, Press ▲ or ▼ key to select a base and press
key, the LCD will display “ENTER PIN”.
4. Input the correct PIN code and press
key to
begin to register the cordless handset, the LCD will
display “SEARCHING”.
5. Press and hold the page key. The base will beep
twice and the red light will flash for one minute.
Note: 1. “SUCCESSFUL” will be shown on handset LCD
display if the handset is registered to the base. Cordless
handset number will be shown after it returns to idle
mode.
2. “NO BASE” will be shown on handset LCD display if
the cordless handset is not registered to the base within
1 minute, register the handset again.
3. “WRONG PIN” will be shown on handset LCD display
if the PIN code you input is wrong. The register fails.
– 31 –