Datasheet

DATE / TIME
You can set the Date/Time displayed in idle mode. The
default setting is “2008, 01/01 12:01”.
1. Press
key.
2. Press ▲ or ▼ key to select “DATE/TIME” and press
key, the LCD will display “YEAR 2008”.
3. Input the correct last two digits of year (range: 00-99)
using number key, press
key to confirm the
setting and enter month and date setting.
4. Input the correct month and date, the format is:
month/date (month range: 01-12, date range: 01-30/31)
using number key, press key to confirm the
setting and enter time setting.
5. Input the correct time, the format is: hour/minute (hour
range: 00-23, minute range: 00-59) using number key.
6. Press key to confirm the setting.
Note: If the value you input is over the range during setting,
you can’t enter next setting by pressing
key, please
enter the correct setting again.
– 30 –