Datasheet

Base Setting
Change PIN
PIN is your base’s identification number, the function is to
avoid the setting is changed by others. The default setting is
“0000”. You may change the PIN. Please take down the
change so as to operate the unit normally.
1. Press key.
2. Press ▲ or ▼ key to select “SETUP BS” and press
key.
3. Press ▲ or ▼ key to select “CHANGE PIN” and press
key, the LCD will show “ENTER PIN”.
4. Press number key to input the old PIN code and press
key, the LCD will show “NEW PIN”, prompt
you to input a new PIN code.
Note: “Wrong PIN” will be shown if the old PIN code you
input is wrong, and then return to step 4.
5. Input the desired new PIN code and press key,
the LCD will show “REPEAT PIN”, prompt you to
input the new PIN code again.
6. Input the new PIN code again and press
key to
confirm the setting.
Note: 1. The PIN code must be 4 digits.
2. If the new PIN code that you input two times is different,
the change will fail, the display will return to step 5.
– 26 –