Datasheet

Basic Operation
Make a Call
1. Press the key, wait for a dial tone, then dial the
desired number.
2. After finishing the conversation, press
key or place
the cordless handset into the charger.
The talk timer will be shown for about 2 seconds before
return to idle mode.
Pre-dialling
1. When the handset is in idle mode, input the desired
number.
2. Press C key to cancel the wrong digit, input the correct
one again. If a pause is needed during dialing, press and
hold Pause key for a while and character “P” will be
shown. A 3 seconds pause will be added while dialing.
3. Press the key, the number will be automatically
dialled out.
4. After finishing the conversation, press key or place
the cordless handset into the charger.
The talk timer will be shown for about 2 seconds before
return to idle mode.
Adjust the Receiver Volume
While the phone is in talk mode, press ▲ or ▼ key on the
handset to adjust the receiver volume of the handset. There
are 5 possible volume selections for handset receiver. The
display will show the current volume level during adjusting.
– 10 –