User Manual PDX-200 Please observe the following to ensure reliable operation of the telephone: –0–
Read this manual thoroughly and observe the operating instructions and information provided. Place the base station on a non-slip surface and lay the connection cables so they cannot be the source of an accident. Do not expose the equipment to extreme temperatures or high relative humidity and protect it from direct sunlight and dusty conditions. Clean the equipment with a soft, damp cloth. Do not use any solvents or aggressive cleaning agents. Only connect approved accessories.
Exemption from Liability We cannot guarantee the information which relates to the technical properties or that contained in this document is correct. The product and its accessories described in this document are subject to constant improvement and further development. For this reason, we reserve the right to modify components, accessories, technical specifications and related documentation of the product described herein without notification.
Only use the connection cable supplied. AC power outlet Phone jack CAUTION: Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. Use only the power supply that came with this unit. Using other power supplies may damage the unit.
Getting Started Install and Charge the Batteries Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. z Place the handset in the base station to charge for 16 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised. Warning: The handset does not work and damaged if the wrong batteries are inserted. If batteries are empty, handset LCD will not has any display and the handset will not response to any key.
Feature List z Comfortable digital cordless phone with DECT Standards z 25Name and number phone book z Caller ID* and Caller ID with Call Waiting z Incoming 20 name/number call log z Multi-language menu z 10 Ringtone melodies z Ringer on/off z 10 Last number redial z 5 level ring volume z Real time clock display z Handset naming z Automatic call answering z Key input tone on/off z Keypad lock z Teleconference+ z Internal free communication between handsets+ z Battery status inc low battery warning z Up to
Handset and Base Layouts –6–
R Redial / Up /Increase volume key Caller ID/Down/ Decrease volume key Menu / OK key Mute / Cancel/ Ring off key Flash key Phone book key Talk/ Off key Asterisk /INT key Hash /Keypad lock key Pause Pause Key –7–
Paging LCD Display –8–
Icon Description Aerial icon Phone icon Speaker phone in use icon Key lock icon No ring icon Microphone mute icon Intercom call indicator Battery level indicator Phonebook icon Menu icon Voice mail waiting indicator (VMWI icon) Caller ID icon Alarm icon –9–
Basic Operation Make a Call 1. Press the key, wait for a dial tone, then dial the desired number. key or place After finishing the conversation, press the cordless handset into the charger. The talk timer will be shown for about 2 seconds before return to idle mode. 2. Pre-dialling 1. 2. 3. When the handset is in idle mode, input the desired number. Press C key to cancel the wrong digit, input the correct one again.
Answer a Call When the phone rings, the icon will flash and the LCD on the handset will show “Call”. If you have subscribed to Caller ID service from your local telephone company, the incoming call information will be shown. 1. Press the key to answer a call. 2. After finishing the conversation, press the cordless handset into the charger. key or place Auto Answer If you set on the “Auto talk”, just need to pick up the cordless handset from the charger to answer the call directly, needn’t press key.
Intercom You can make an intercom any two handsets (if you have more than one handset). 1. When the handset is in idle mode, press and hold INT key, “INT-Number?” will be shown, input the called handset number. 2. The called handset will ring and the LCD will show the calling handset’s name and number. 3. Press key in the called handset to answer. Call Transfer The function allows you to transfer an external call from a handset to another handset. 1.
mode with the caller. 2. Only the calling unit can operate the “SWITCHING” function. 3. You can only make an intercom call during call timer is displayed. 4. After power is failure, you answered a call, the intercom function is disable if power is restored during talking. Three-way Conversation You may have a 3-way conversation using the intercom and an open line. 1. With the caller on line, press INT key on the calling unit and input the called unit number.
Muting the Ringer volume Press and hold key in idle mode to activate or icon turns on or off. deactivate the handset Ringer. The Muting the Microphone Press key can switch the microphone on or off during a call. The icon turns on or off. Paging the Handset If a handset has been misplaced, it is possible to call all the handsets. Short press Page key on the base to station. To stop the page call: Short press any key on the handset or press page key briefly on the base.
2. Press ▲ or ▼ key to select the desired redial number. 3. Press key, the telephone number is automatically dialed out. Save Redial Number 1. 2. 3. 4. When the handset is in idle mode, press key. Press ▲ or ▼ key to select the desired redial number. Press key to enter menu, press ▲ or ▼ key to select “SAVE NUMBER”, press key on the handset, the selected number will be shown, press key ,“ENTER NAME” will be shown and input the desired name. You must input the name, otherwise the record can’t be saved.
4. Press key to confirm. Note: During redial function operating: z If you want to return to the upper layer menu, press C key. z If you want to return to idle mode directly, press key on the handset. Caller ID Service The caller’s information will be displayed and recorded if you have subscribed to Caller ID service from your local telephone company. When the telephone rings, the caller’s information will be displayed on the handset LCD display.
The handset will prompt user if there is unanswered call. When the handset is in idle mode, “ ” will be displayed prior to other display information. If you reviewed all the missed calls from handset, the display ” will be disappeared. “ Note: 1. If you reviewed all the missed calls from one handset, ” will be disappeared from other the display “ handsets. 2. Press * key to toggle the display between name and number. Review Caller ID Record 1.
4. 5. 6. Press ▲ or ▼ key to select “Select”, press key. To insert a digit using the keypad at a desired location. To delete a digit before the cursor, press C key. After editing, take telephone line with the handset, the number will be automatically dialed out. Save Call Record 1. 2. 3. 4. 5. When the handset is in idle mode, press key. Press ▲ or ▼ key to select the desired record. Press key to enter menu. Press ▲ or ▼ key to select “SAVE NUMBER”, press key.
Phone Book The telephone can store up to 25 entries in the phone book with name and call number. When the function is supported by the telephone provider service and the caller, the handset displays the name of the caller (when stored in the phone book). Store Entries 1. 2. 3. Press key to access phone book memory. key to access phone book menu. Press Press ▲ or ▼ key to select ADD NEW and press key. key 4. Enter number (max. 24 digits) and press when finished 5. Enter name (max.
Delete Entries Press key to access phone book memory. 1. Press ▲ or ▼ key to scroll. key to select a desired entry, and then press 2. Press ▲ or ▼ to select the submenu DELETE? 3. Press key to delete the entry. 4. Press key again to confirm. Delete All Entries Press key to access phone book memory. 1. Press ▲ or ▼ key to scroll. key to select a desired entry, and then press 2. Press ▲ or ▼ to select the submenu DELETE ALL? 3. Press key to delete the entry. 4. Press key again to confirm.
Menu Operation Handset Setting Ring Melody You may select one of the 10 available ringer tones for your incoming calls alert tone. The default setting is “Melody 1”. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP HS” and press key. 3. Press ▲ or ▼ key to select “RING MELODY” and press key. 4. Press ▲ or ▼ key to select the desired ring melody, the selected melody will be sounded. key to confirm the setting. 5.
TONES Low Battery You may set the warning beep to “On” when your cordless handset battery is low, so as to alert you to charge the battery. The default setting is “On”. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP HS” and press key. 3. Press ▲ or ▼ key to select “TONES” and press key. 4. Press ▲ or ▼ key to select “LOW BATTERY” and press key. 5. Press ▲ or ▼ key to select “ON” or “OFF”. key to confirm the setting. 6.
Key Tone You may set the key tone to “On” or “Off” when you press the keypad. The default setting is “On”. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP HS” and press key. 3. Press ▲ or ▼ key to select “TONES” and press key. 4. Press ▲ or ▼ key to select “KEY TONE” and press key. 5. Press ▲ or ▼ key to select “ON” or “OFF”. 6. Press key to confirm the setting.
Alarm z z Press key. Press ▲ or ▼ key to select SETUP HS and press key. z Press ▲ or ▼ key to select ALARM and press key. z Press ▲ or ▼ key to select ON or OFF. z Enter HH:MM in 24 hour format z Press key to confirm. Note: When Alarm time is reached, “ALARM ON” will blinking and alarm sound will stop after around 1 minute. Handset Name You can set the cordless handset name that you like. The default setting is “Handset”. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP HS” and press key. 3.
Language Sixteen different languages are available for selection for each handset. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP HS” and press key. 3. Press ▲ or ▼ key to select “LANGUAGE” and press key. 4. Press ▲ or ▼ key to select Language. 5. Press key to confirm the setting. Reset Handset This option allows user to restore the cordless handset to the default setting. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP HS” and press key. 3.
Base Setting Change PIN PIN is your base’s identification number, the function is to avoid the setting is changed by others. The default setting is “0000”. You may change the PIN. Please take down the change so as to operate the unit normally. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP BS” and press key. 3. Press ▲ or ▼ key to select “CHANGE PIN” and press key, the LCD will show “ENTER PIN”. 4.
Ring Melody You may select one of the 5 available base ringer tones for key. your incoming calls alert tone. Press 1. Press ▲ or ▼ key to select “SETUP BS” and press key. 2. Press ▲ or ▼ key to select “RING MELODY” and press key. 3. Press ▲ or ▼ key to select the desired ring melody, the selected melody will be sounded. key to confirm the setting. 4. Press Ring Volume You may select one of the 5 available volumes for your incoming calls alert tone. The default setting is volume 5.
Dial Mode You may set the dial mode to “Tone” or “Pulse” according to your needs. The default setting is “Tone”. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP BS” and press key. 3. Press ▲ or ▼ key to select “DIAL MODE” and press key. 4. Press ▲ or ▼ key to select “TONE” or “PULSE”. 5. Press key to confirm the setting. Recall Time You may select flash time from 100ms to 800ms according to your needs. The default setting is 100ms. 1. Press key. 2. Press ▲ or ▼ key to select “SETUP BS” and press key. 3.
VMWI If you have subscribed to a voice messaging service, the VMWI LED on the base will flash to alert you if you have a messages waiting. To turn Visual Message Waiting Indication (VMWI) off 1. Press key. 2. Press ▲ or ▼ key to select “SETUP BS” and press key. 3. Press ▲ or ▼ key to select “VMWI” and press key. “VMWI OFF?” will display. 4. Press key to confirm the setting. Reset Base This option allows user to restore the base and Date/Time to the default setting. 1. Press key. 2.
DATE / TIME You can set the Date/Time displayed in idle mode. The default setting is “2008, 01/01 12:01”. 1. Press key. 2. Press ▲ or ▼ key to select “DATE/TIME” and press key, the LCD will display “YEAR 2008”. 3. Input the correct last two digits of year (range: 00-99) using number key, press key to confirm the setting and enter month and date setting. 4.
Registration Up to 4 cordless handsets can be registered to one base. 1. Press key. 2. Press ▲ or ▼ key to select “REGISTRATION” and press key. 3. Press ▲ or ▼ key to select “REGISTER” and press key, Press ▲ or ▼ key to select a base and press key, the LCD will display “ENTER PIN”. 4. Input the correct PIN code and press key to begin to register the cordless handset, the LCD will display “SEARCHING”. 5. Press and hold the page key. The base will beep twice and the red light will flash for one minute.
Select Base This option allows user to select a base. 1. Press key. 2. Press ▲ or ▼ key to select “REGISTRATION” and key. press 3. Press ▲ or ▼ key to select “SEL BASE” and press key, Press ▲ or ▼ key to select a specific base or Auto. 4. press key to comfirm the setting. Remove Handset This option allows user to remove the registered cordless handset from the base. 5. Press key. 6. Press ▲ or ▼ key to select “REGISTRATION” and press key. 7.
Technical Specifications Handset Operating Time: (average values*) AC / DC Adapter Telephone connection Approx. 10 hours talk time Approx. 100 hours standby VD060025D For Base Unit Input: 230V AC / 50 Hz Output: 6VDC, 250mA VD060015D For Charger Input: 230V AC / 50 Hz Output: 6 VDC, 150 mA Single-phase AC excluding IT installations defined by the EN 60950 standard. Caution: the network voltage is classified as a hazard by the criteria of this standard.
General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Periodically clean the charge contacts on the handset, base and charger with a soft cloth. Troubleshooting Guide PROBLEMS Registration not work. No display. CAUSES The battery is not sufficiently charged. SOLUTIONS Charge the battery for 14 hours (see Battery Charging). Handset and base station were not prepare for registration.
station: blinking! station range. The handset is not registered. The base station does not work. – 35 – Register the handset (see Registering Handset). Unplug and then plug the power adapter to the power outlet (220-230V AC / 50 Hz) and the other end into the power jack on base bottom.