Service manual

Printed in U.S.A.
Page 6
ProFloSE Downflow
Control Start-Up Procedures (Cont’d.)
4.
Start An Immediate Extra Cycle
When starting an Extra Cycle, you will have one or two options:
1. Press and Release the Extra Cycle Button:
-With Immediate Regeneration controls the control will go into regeneration cycle immediately.
-With Delayed Regeneration controls the Service Arrow will begin to flash immediately and a regeneration will occu
r
at the present regeneration time (i.e. 2:00 a.m.)
2. Press and Hold for 5 seconds the Extra Cycle Button:
-With Delayed Regeneration controls, the control will go into regeneration cycle immediately.
The following series of displays appear when the control enters a regeneration cycle:
5.
Regeneration Cycle Displays