Service manual

Printed in U.S.A.
Page 12
ProFloSE Downflow
Master Programming Mode Flow Chart
Note:
1. Set Time Of Day Display To 12:01 P.M.
2. Push And Hold The Set Up And Set
Down Button For 5 Seconds.
3. Push Extra Cycle Button Once Per
Display Until All Displays Are Viewed
And Normal Operation Is Resumed.
4. Option Setting Displays May Be
Changed As Required By Pushing
Either The Set Up Or Down Button.
5. Depending On Current Valve
Programming Certain Displays Will
Not Be Able To Be Viewed Or Set.