Specifications

ProFlow Eliminator | 7 |
Pro Flow 460i Series
Control Settings
ProFlow 460i Control
Programming
Plug the wall-mount transformer into a functioning
electrical outlet that is not controlled by a switch. Plug the
transformer into the transformer plug receptacle on the
control.
Open the access door by pushing the raised tab on the
door toward the le while pulling the tab out (5).
Time-of-Day Setting
With the jumper on the set of pins next to the word TIME
(6), set the time of day to the closest hour by pressing the
black TIME SET bu on. PM hours are indicated by a light
next to the le ers PM on the display window.
Note: The use of a small needle-nose pliers will aid in
moving the jumper.
Note: The unit is factory set to regenerate at 2:00 a.m. If
you prefer to have the unit regenerate at an earlier or later
time, simply set the current time of day accordingly (e.g.,
to have the unit regenerate at
4:00 a.m.—two hours later—set the clock two hours earlier
than the actual time of day).
Note: The Timer Locking Pin should always be horizontal
(5) during operation.
Hour Time Display
Access Door
Water-Flow Indicator
PM Indicator
Raised Tab
Jumper
Spare Jumper
Indicator Knob
Timer Locking Pin
Time-Set Button
Transformer Plug Receptable