Installation Guide

ManualsBrandsPROFLO ManualsBathroom AccessoriesPROFLO 2.1 Gallon Thermal Expansion Tank

Owners Record Keep for later use

Serial number (see tank data label at bottom of tank): ________________________________________________________________________________________________

Model (see tank data label at bottom of tank): ______________________________________________________________________________________________________

Date Installed: _____________________________________________________________________________________________________________________________________

Installer Name: ___________________________________________________________________________________________________________________________________

Telephone number: ________________________________________________________________________________________________________________________________

Retain copy of cancelled check and installation receipt

Products Covered: All Thermal Tanks Manufactured and Distributed by Ferguson

All parts for PROFLO products are warranted to the original consumer purchaser to be free from defects in material

and workmanship for a period of one (1) year. This warranty is made to the original consumer purchaser and shall be

effective from date of purchase as shown on purchaser’s receipt.

PROFLO will replace, free of charge, during the warranty period, any part which proves defective in material and/or

workmanship under normal installation, use and service. PROFLO’s obligation under this warranty shall be limited to the

replacement of any part or parts which prove defective upon PROFLO’s local dealer inspection. Transportation charges

should be prepaid, please ship with a copy of the purchase receipt. For the PROFLO Dealer nearest you, call 757-874-7795.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY MADE BY PROFLO AND IS LIMITED TO THE DURATION OF THIS

WARRANTY AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, WHETHER IMPLIED BY OPERATION OF LAW OR

OTHERWISE, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABLILITY AND FITNESS OR

FITNESS FOR A PARTICULAR PURPOSE, ARE FOR PERSONAL INJURY OR PROPERTY DAMAGE OR ANY OTHER LOSS,

DAMAGE, COST OF REPAIRS OR INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND,

WHETHER BASED UPON WARRANTY, CONTRACT, STRICT LIABILITY, DESIGN, MANUFACTURE, SALE, TRANSPORTATION,

INSTALLATION, USE OR REPAIR OF THE PRODUCTS SOLD BY PROFLO. BUYER HEREBY ACKNOWLEDGES AND AGREES

THAT UNDER NO CIRCUMSTANCE, AND IN NO EVENT, SHALL PROFLO’S LIABILITY, IF ANY, EXCEED THE REPLACEMENT

OF THE DEFECTIVE PRODUCT(S); NO ADDITIONAL ALLOWANCE SHALL BE MADE FOR THE LABOR OR EXPENSE OF

REPAIRING OR REPLACING DEFECTIVE PRODUCTS OR WORKMANSHIP OR DAMAGE RESULTING FROM THE SAME.

EXCEPT AS EXPRESSLY SET FORTH IN THIS PARAGRAPH, ALL PRODUCTS AND/OR SERVICES PROVIDED BY PROFLO

AND ITS EMPLOYEES AND AGENTS ARE PROVIDED “AS IS,” “WHERE IS,” “AND “WITH ALL FAULTS.”

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation

or exclusion may not apply to you.

This warranty is void for any damage to the PROFLO product due to misuse, abuse, neglect, accident, improper

installation, any use in violation of instructions furnished by us, or any use of replacement parts other than genuine

PROFLO parts.

One Year Limited

Warranty

Manufactured for/Fabriqué pour/Fabricado para: PL Sourcing, Inc. PO. Box 2778 Newport News, VA 23609 Made in/Fabriqué en/Hecho en: Taiwan

Summary of content (4 pages)

PAGE 1
One Year Limited Warranty Products Covered: All Thermal Tanks Manufactured and Distributed by Ferguson All parts for PROFLO products are warranted to the original consumer purchaser to be free from defects in material and workmanship for a period of one (1) year. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.
PAGE 2
Installation, Warnings, and Operation Instructions PROFLO, Potable Water Expansion Tanks Operation This product must be installed by a Qualified Professional following all local and national plumbing and electrical codes. Read and understand fully the instructions included here and those on the Ferguson website which are updated on a regular basis. This product must be inspected annually by a qualified professional for any signs of corrosion or leakage and replaced immediately if these signs are present.
PAGE 3
Before Installation Product Inspection Visually inspect the product for any signs of damage that may have occurred during transportation. If the tank is dented, bent or scratched, return the product to the original purchase point for replacement. Pre-Charge Adjustment This expansion tank is shipped from the factory with a pre-charge of 40 psi. Any adjustments to the factory pre-charge must be done prior to initial tank installation and with 0 psi pressure on the system.
PAGE 4
Maintenence Specs/Dimensions This expansion tank and the entire system must be checked annually by a qualified professional. Visually examine the tank and its connection to the system piping looking for any signs of water leakage or corrosion on the exterior of the tank or the connection. If this expansion tank shows any visible signs of leaking, corrosion or rusting, the tank must be replaced immediately to avoid personal injury or property damage.