Specification Sheet

Back Outlet Toilet

Wax Gasket

PFWRBO

Product Features

• 100% pure petroleum wax gasket

• Designed to fit most 4” wall hung toilets

• 24 per pack

• 11.5lbs. carton weight

• Constructed of a sturdy felt core. Ring will not dry out,

harden or deteriorate.

• Provides alignment and can be used on cast iron, copper or

plastic fittings.

Physical/Chemical Properties

Specific Gravity 0.82 – 0.86

Appearance Golden Wax

Shelf Life 1 year from manufacture

Melting Point 150° F – 160° F

Directions for Use

Be sure the Wax Gasket is at room temperature (above 70°F). Remove

wrapping from wax ring. With bowl on protective pad, have rear side of

bowl face you. Place wax ring around outlet opening. Make sure wax ring

is firmly in place to assure adhesion.

Precautions

Read all cautions and directions carefully before using this product. Make

sure water supply is shut off before beginning installation.

DO NOT INSTALL ON WET SURFACES. Keep away from direct sunlight to

prevent darkening. Do not store near extreme heat. KEEP OUT OF REACH

OF CHILDREN.

Warranty and Codes

This PROFLO product carries a 1-year limited warranty.

Meets Federal Specification TT-P-1536A.

Common Applications

Designed to make a sanitary seal for back outlet toilets.

Ingredients

Petrolatum (Non-Hazardous)

When used for the intended end use application, this

product is considered an “article” as defined in

OSHA 29 CFR 1910.1200(c).

Distributed Exclusively by Ferguson and Wolseley Canada