Specification Sheet

©2020 Ferguson Enterprises, LLC 1220 PROFLO.COM
PF93026
Product Specifications
* All measurements are nominal. Please verify before actual installation.
• Rugged cast iron pump body for
durability
• SJE Rhombus vertical float switch
• 2” NPT Discharge
• Handles up to 2” solids
• Non-clogging stainless steel vortex
impeller
• Carrying handle attached
• 10’ power supply cord
• Built-in thermal overload protection for
safety
• Permanent split capacitor continuous
duty motor
• 7.6 amps, 912 Watts
• 3450 RPM
• Tough polyethylene construction
• Corrosion resistant
• Gasket sealed liquid and airtight cover
with 8 bolts
• 2” Discharge & vent
• 24” x 24” (61 cm x 61 cm) - 45 gallon
(151.4 L) capacity
• Built-In anti float collar prevents basin
from floating
• Molded torque stops prevent pump
from turning
• Pre-plumbed with 2” PVC pipe
• Integrated 360° lifting handle
• 4” Inlet
• Polyethylene structural foam cover
• 45 Gallon total capacity
• 22 Gallon working capacity
R
Specifications
Warranty and Codes
This product comes complete with installation, operating, care and maintenance
instructions. This PROFLO simplex sewage pump kit carries a 3 year warranty when
installed in residential applications. See owners manual for warranty details.
This PROFLO simplex sewage pump kit carries a 3 year limited warranty. In an effort to
continually improve our products, we will make design changes from time to time. We
reserve the right to ship newly designed product to fill any order unless it is agreed in
writing to do otherwise.
PF93026
Pre-Assembled Simplex Sewage
Pump Kit
Pump Features
Basin Features
16"
2-5/16"
24-1/8"
1-3/4"
19-1/2" B.C.
18-1/4" B.C.
21-1/8"
25-1/4"
24-1/8"
2 Piece Basin Cover
Built-in Torque Stops
Motor Performance
• 1/2 HP 120 Volt AC (7.6 amps)
GPM
GPH
Lift
Performance Chart
80
4800
0'
68
4080
5'
60
3600
10'
44
2640
15'
13
780
20'
2
120
25'