Specification Sheet

Distributed Exclusively by Ferguson and Wolseley Canada

PF9281FDC

Warranty and Codes

This PROFLO product carries a 1-year limited warranty.

• CAN 1-9.1 U.S., requirements 3-88

• CGA CR 91-002, ANSI Z21.15

• UL 125 “LP GAS”, UL 842 - subject 258

Product Features

• Gas ball valve unibody design, standard port, female end-flare end

• Blow out proof stem, chrome plated brass ball

• PTFE seats

• 100% electronically tested in the open and closed position at 80 PSI

• One piece body

• Not for use at or below ground level

PF9281

FIP-Flare Gas Ball Valve

Size UNF NPT øP I1 L L1 L2 L3 ød1 ød2 R CH h lbs

PF9281FDC

1/2” FIP x 3/8” Flare 5/8” x 18 1/2” x 14 0.27 0.54 2.24 1.08 1.16 0.21 0.31 0.53 2.05 0.98 1.06 0.20

PF9281FDD

1/2” FIP x 1/2” Flare 3/4” x 16 1/2” x 14 0.39 0.56 2.34 1.08 1.26 0.25 0.43 0.64 2.05 0.98 1.14 0.31

Part Name Material

PCS

1 Body Brass CW 617N UNI EN 12165 1

2 Retaining Nut Brass CW 614N UNI EN 12164 1

3 Ball Brass CW 614N UNI EN 12164 1

4 Ball Seat PTFE 1

5 Ball Seat PTFE 1

6 Thrust Washer PTFE 1

7 O Ring NBR 2

8 Stem Brass CW 614N UNI EN 12164 1

9 Screw Steel 6/S 1

10 Handle ZAMA G Zn A14 UNI 3717 1

Product Specification

PAGE 1
PF9281 ® FIP-Flare Gas Ball Valve Product Features • • • • • • Gas ball valve unibody design, standard port, female end-flare end Blow out proof stem, chrome plated brass ball PTFE seats 100% electronically tested in the open and closed position at 80 PSI One piece body Not for use at or below ground level Part Name Material # PCS 1 Body Brass CW 617N UNI EN 12165 1 2 Retaining Nut Brass CW 614N UNI EN 12164 1 3 Ball Brass CW 614N UNI EN 12164 1 4 Ball Seat PTFE 1 5 Ball Seat PTFE 1