Specification Sheet

Distributed Exclusively by Ferguson and Wolseley Canada

“Not for potable use”

Product Features

• Gas ball valve unibody design, standard port, threaded end

• Blow out proof stem, chrome plated brass ball

• PTFE seats

• 100% electronically tested in the open and closed position at 80 PSI

• One piece body

• 5 PSI for indoor shutoff per CGA 91-002

• Not for use at or below ground level

Warranty and Codes

This PROFLO product carries a 1-year limited warranty. CAN 1-9.1, U.S. requirements 3-88, CGA

CR 91-002, ANSI Z21.15 UL 125 “LP GAS”, UL 842 - subject 258, Connection: ANSI B 1.20.1

PF9280 Series

Gas Ball Valve

Size øP I I1 L R CH h lbs

PF9280C 3/8” FIP x 3/8” FIP 0.31 0.40 0.40 1.69 2.05 0.78 1.06 0.20

PF9280D 1/2” FIP x 1/2” FIP 0.39 0.53 0.54 2.16 2.05 0.98 1.14 0.31

PF9280F 3/4” FIP x 3/4” FIP 0.47 0.55 0.56 2.36 2.05 1.22 1.28 0.49

Part Name Material Qty

1 Body Brass CW 617N UNI EN 12165 1

2 Retaining Nut Brass CW 614N UNI EN 12164 1

3 Ball Brass CW 614N UNI EN 12164 1

4 Ball Seat PTFE 1

5 Ball Seat PTFE 1

6 Thrust Washer PTFE 1

7 O Ring NBR 2

8 Stem Brass CW 614N UNI EN 12164 1

9 Screw Steel 6/S 1

10 Handle ZAMA G Zn A14 UNI 3717 1

PF9280C

Product Specification

CALIFORNIA PROP 65 WARNING: This product may contain chemicals known to the State of

California to cause cancer, birth defects or other reproductive harm.

Wash Hands After Handling.

PAGE 1
PF9280 Series ® Gas Ball Valve Product Features • Gas ball valve unibody design, standard port, threaded end • Blow out proof stem, chrome plated brass ball • PTFE seats • 100% electronically tested in the open and closed position at 80 PSI • One piece body • 5 PSI for indoor shutoff per CGA 91-002 • Not for use at or below ground level PF9280C Part Name Material Qty 1 Body Brass CW 617N UNI EN 12165 1 2 Retaining Nut Brass CW 614N UNI EN 12164 1 3 Ball Brass CW 614N UNI EN 12164 1 4 Ball