OWNER’S MANUAL INSTALLATION AND OPERATION INSTRUCTIONS FOR: SUBMERSIBLE UTILITY PUMPS Models: PF91025, PF91250, PF91251 PF91255, PF91257, PF91330 PF91335, PF91331, PF91501 PROFLO Utility Manual Revised 12-06
Carefully read and understand all of the Warnings and installation instructions in this manual. Failure to follow these instructions could lead to serious bodily injury and/or property damage. Retain these instructions for future reference. This pump has been manufactured with your needs in mind. Properly installed in the right application, your new PROFLO Pump will give you years of carefree performance. DANGER Water and electricity can be dangerous if certain precautions are not adhered to.
REPLACEMENT PARTS DANGER 1 Do not use this unit to pump chemicals, flammable liquids, sewage or corrosive liquids. You could injure yourself and the pump will fail. Pumping these types of liquids voids the warranty. This pump will handle fluids with the same characteristics as water 1 2 WARNING 2 Your pump has thermal over-load protection built in. It is not recommended for pumping liquids over 120° F. The thermal overload protector will automatically shut down the pump in an overheat situation.
WARNING ALWAYS DISCONNECT THE POWER SOURCE BEFORE ATTEMPTING TO INSTALL, SERVICE OR PERFORM MAINTENANCE ON THE PUMP. FAILURE TO DO SO MAY RESULT IN FATAL ELECTRICAL SHOCK. INSTALLATION/OPERATION 1. NOTICE Height and/or piping restriction will reduce the pump output performance. See the performance chart below to insure you have the proper pump for your application. Whenever possible use the same or larger size pipe than the pump discharge for optimum performance.
