Installation Manual

BEFORE YOU BEGIN
• Observe all lo c al plumbing and building
codes.
• Prior to installation, unpack the new lavatory
and inspect for damage. Return the lavatory
to its protective carton until you are ready to
install it.
• Inspect the existing drain and supply tubing.
Replace if necessary.
• Use the template supplied with the lavatory.
• Refer to the roughing in information to ensure
proper installation for AD A applications.
• Fail ure to follow these precautions m ay
result in
a poor installation.
• The walls and floor must be square, plumb,
and level.
• Undercounter lavatories should be installed
only by experienced installers.
• Install so future removal from underneath
the countertop is possible. This will avoid
countertop damag e.
TOOLS AND MAT ERIALS
PREPARATION
• I nstall the water suppli es and drain pip ing
according to the roughing-in information.
NOTE: You may require different, mor e
special ized tools to install this lavatory to
coun
tertop materials other than wood or
wood composites.
NOTE: Install so future removal from
underneath the countertop is p ossible to avoid
countertop damag e.
• C heck the desired lavatory location for
clearance between the backsplash, faucet
and lavatory.
• Verify cabinet clearance beneath the
countertop.
• C ut out the template where in dicated for
countertop ope n ing. C ut along the ins ide of
the cutting line.
• Position and trace around the template on
the countertop with
a pencil.
• Mark the faucet hole centerline on the
countertop.
Tape measure Drill
Sealant
Pencil
Cl aw hammerScissors
Jigsaw
SEALANT
Safety glasses
21
CAUTION
Risk of personal injury or
product damage.
Handle with ca re. Product can break,
chip or cause injury if handled carelessly.
Get help lifting the lavatory.