Installation Guide

PRIMERS
1
1. PRODUCT NAME
PROFLEX® Interior and Exterior Grade Primers
2. MANUFACTURER
Proflex Products, Inc.
2826 Broadway Center Blvd
Brandon, Florida 33510
Telephone: 863-937-9623
Toll Free: 877-577-6353
Fax: 863-937-9624
Internet: www.proflex.us
3. PRODUCT DESCRIPTION
PROFLEX® PR-Series of primers are necessary companion products to be used with the PROFLEX® series of elastomeric
membranes. The PR-Series of primers are designed to condition and prepare a substrate for the application of PROFLEX®
membranes. The primers are formulated for interior or exterior conditions, see specific features and benefits of each product, and
can be applied easily and safely to a variety of substrates.
Suitable
Substrates
Concrete: Poured, prestressed, and precast, Concrete backer boards, Cured mortar beds, self-leveling compounds, gypcrete
Wood: Exterior grade plywood, hardwood, tongue and groove, and OSB
Other Substrates: Contact Technical Support for recommendations and usage
Shelf-life,
Storage,
and
Clean-up
12 months, rotate stock, store primers between 45° to 90°F, in a dry area. Protect primers from freezing and from temperatures
exceeding 120. Store in original, tightly sealed containers. Clean up wet product with a damp cloth, dried product may be scraped up
and cleaned with mineral spirits.
Note: Refer to SDS for specific handling and clean-up instructions for the PR27 Exterior Grade primer.
PROFLEX® PR11 Interior / Exterior Grade Primer
Safe, Non-flammable, water based product.
Easy installation, can be applied with roller of pressure sprayer.
Coverage between 300-800 sq. ft. /gal (Note: coverages will vary depending on porosity of
substrate and application type.
Suitable for Interior and Exterior conditions.
Primer will dry to use in 20 - 45 minutes, depending on application type and substrate porosity.
Packaging: 1-Gallon Container, 4 Containers per Carton, 45 Cartons per Pallet (180 units).
5-Gallon Container, 36 Containers per Pallet
PROFLEX® PR27 Exterior Grade Primer (Solvent-Based, Hazmat Certified)
Solvent-Based product designed specifically for exterior applications where conditions of higher
relative humidity (Rh) exists.
Coverage between 300 - 800 sq. ft. /gal (Note: Coverages will vary depending on porosity of
substrate and application type.
Suitable for Exterior and On Grade installations.
Primer will dry for use in 20 - 45 minutes, depending on application type and substrate porosity.
Packaging: 1-Gallon Container, 4 Containers per Carton, 45 Cartons per Pallet (180 units)
SDS sheet available, Hazmat shipping classification, RESIN SOLUTION 3 UN 1866 GROUP 2
See second page for SP1 and GP1 Primer.
Data Sheets are subject to change without notice. For latest revision, visit www.proflex.us 2122016

Summary of content (3 pages)