Operation Manual

ADAGIO SET – Cordless doorbel set UK - 2
PAC-312 / PAC-314 / PAC-316 / PAC-318
- Batteries are not correctly installed
in the push-button
Possible solution: - Replace battery
- Reinstall the batteries in their
correct positions (see battery
installation for push-button unit)
Warning
1. Do not fasten the push-button onto a metal
upper surface or PVC type of door. This
restricts their range.
2. Do not expose the bell unit to direct rain,
splashing water or direct sunlight, and do not
immerse the unit in water.
3. Do not drop the bell or push-button, or subject
them to severe insults.
4. Do not expose either unit to high
temperatures, nor place them close to sources
of heat.
5. Never combine different types of batteries, nor
use old and new batteries together.
6. Always use alkaline batteries: they will last
longer and there is less risk of leakage.
7. If the bell will be out of use for a prolonged
period, remove the batteries.
8. The bell unit is suitable for use indoors only.
9. Please dispose of old or faulty batteries in an
environmentally-friendly manner, in
accordance with applicable laws.
10. Ensure that no naked flames, e.g. candles, are
placed near the bell.
11. Replace batteries using only those
recommended by the manufacturer.
GENERAL specifications
• Range of 100m (in open spaces)
• 8 tunes
• Push-button: 1 x CR2032 lithium battery
(included)
• Push-button (IP44) is watertight against water
splashes
• Operating frequency: 433.92 MHz.
• 2 volume settings
• Gong: 2 x AA batteries (not included).
Declaration of conformity
ELTRA NV, Pachtgoedstraat 2, 9140 Temse, Belgium, hereby
declares that the product Adagio Set comprising:
Transmitter: PAC-312T / PAC-314T / PAC-316T / PAC-318T
Receiver : PAC-312R / PAC-314R / PAC-316R / PAC-318R
(Transmitters en receivers work identically)
satisfies all essential requirements and other applicable
stipulations of the LVD and EMC guideline 89/336/EEC en
1995/5/EEC and has been tested against the following
standards:
EN 300 220-1/-2 V2.1.1
EN 301 489-1/-3 V1.4.1-V1.6.1
EN 60950-1:2006
IEC 62080:2001,EN 60065:2002
The original declaration of conformity can be called up on
www.profileDIY.com
Terms of the guarantee
The guarantee period for PAC-312 / PAC-314 / PAC-316 /
PAC-318 is 2 years from the date of purchase. During the
guarantee period, ELTRA NV will remedy any defect that is
attributable to faulty materials or manufacture. ELTRA NV may
elect either to replace or repair the defective appliance.
ELTRA NV is under no obligation to repair or replace an
appliance where a defect arises due to damage, inappropriate
use, modifications or alterations made or occurring after the
purchase date.
Return the faulty appliance, together with proof of purchase, to
the shop from which it was purchased. Always include a note
describing the problem.
Damage
Under no circumstances can ELTRA NV be held liable for
damage of any kind where the appliance has not been
installed in accordance with the instructions provided, nor for
damage resulting from unforeseeable circumstances such as
natural disaster, lightning strike, etc. All such consequential
costs are therefore for the exclusive account of the purchaser
and are not covered under the terms of the guarantee.