Manualshelf

Cov lus qhia

ManualsBrandsPROFILE tSIM Manualsqaij WedgesPROFILE DESIGN HSF BTA Drink System Tilt Wedges
1234567
HSF BTA Wedges
4
INSTALLATION INSTRUCTIONS
1. Choose the number of wedges required, either by measuring the angle of the mount or test fitting.
2. Mount the first wedge to the BTA mount using two of the countersunk bolts and torque to 3Nm.
• Do not grease the bolts as this will neutralise the threadlocker.
3. Each successive wedge is mounted to the one below using two countersunk bolts torqued to 3Nm.
4. Once you have achieved the desired angle, mount the bottle cage to the uppermost wedge using the bolts supplied with the cage, with the washer
underneath the front bolt and torque to 3Nm.