HSF BTA Wedges HSF BTA WEDGES REVISION 01-05-25-2022 1
HSF BTA Wedges INTRODUCTION Thank you for purchasing this set of Profile Design HSF BTA Wedges. Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's warranty policy. If you are not familiar with installing bicycle accessories, please seek the assistance of your local Profile design dealer by logging on to www.profile-design.
HSF BTA Wedges COMPONENT LIST 01 02 03 Ref.# Part.# QTY. Req. 1 274473 3 HSF BTA Wedges (5 degree) 2 313602 6 Bolt - M5x10mm FHB w/Nylok 3 275674 1 Washer 6x12x1.
HSF BTA Wedges PART DRAWINGS 124.8 mm 20.5 mm 14.
HSF BTA Wedges INSTALLATION INSTRUCTIONS 1. Choose the number of wedges required, either by measuring the angle of the mount or test fitting. 2. Mount the first wedge to the BTA mount using two of the countersunk bolts and torque to 3Nm. • Do not grease the bolts as this will neutralise the threadlocker. 3. Each successive wedge is mounted to the one below using two countersunk bolts torqued to 3Nm. 4.
HSF BTA Wedges WARNING • Profile Design Worldwide Two Year Limited Warranty. • Profile Design, LLC (distributor) warrants to the original retail purchaser ("you") that the Profile Design product for which you received this warranty is free from defects in material and workmanship for (2) two years from the date of original retail purchase. For more details on this warranty, its exclusions and/or how to make a claim under the warranty please call +1 310.747.0085 extension 161 or visit www.profile-design.
HSF BTA Wedges 2677 El Presidio Street Long Beach, CA 90810 Ph: 310-884-7756 www.profile-design.
