Operation Manual

33
• Washtheattachmentinwarmsudsywater.
Loosen stubborn residues with a cleaning
brush. Rinse in clean water.
• Youcanalsowashtheattachmentinthedish-
washer. Ensure that the cleaning agents (clean-
ing and rinsing agents, salt) are not overdosed.
• Keeptheattachmentinasafeplace.Otherwise
it may get lost.
Storage
• Cleanthedeviceasdescribedandallowtodry
completely.
• Werecommendthatyoukeeptheappliancein
the original packaging if the appliance will be
not used for long periods.
• Alwayskeeptheapplianceoutofthereachof
children in a dry, well ventilated place.
Troubleshooting
Malfunc-
tion Pos-
sible
Cause Remedy
The appli-
ance does
not work/
the motor
does not
turn
Does the jug
stand properly
on the base?
Check if the
jug is properly
placed on the
base.
Is the appliance
switched on?
Is the mains
socket defec-
tive?
Try a different
socket
The milk
doesnot
foam
Is frothing
attachment
“B” properly
attached?
Check the at-
tachment.
Is the attach-
ment blocked?
Is there too little
milk in the can?
There should
be between 60
and 120 ml in
the can
Malfunc-
tion Pos-
sible
Cause Remedy
The appli-
ance turns
off too
early when
stirring or
frothing
repeatedly.
The appliance
has not cooled
down.
Leave the
appliance to
cool down for
2 minutes (see
“Button Func-
tions”).
Technical Data
Model: ...................................................PC-MS 1009
Power supply: .....................................230V~,50Hz
Power consumption: ....................................... 600 W
Protection class: .......................................................Ι
Net weight: .......................................approx. 1.02 kg
Subject to change without prior notice!
This device complies with all current CE directives,
such as electromagnetic compatibility and low volt-
age directive and is manufactured according to the
latest safety regulations.