Operation Manual

54
CAUTION:
Do not use a wire brush or any abrasive
items.
Do not use any acidic or abrasive detergents.
Glass ceramic Hob
Clean the surface from food remains when it’s
still warm using a moist cloth or tissue.
Wash the hob using a soft sponge and some
water, then wipe dry with a soft cloth.
Cleaning agent for glass-ceramics surfaces:
In case of stubborn, baked-in remains, use
suitable cleaning products available at special
departments of department stores.
Housing
Clean the housing after use using a slightly
moist cloth.
Make sure that no uid matter gets into any of
the openings of the housing. This might dam-
age the device or result in an electric shock.
Storage
Only store the appliance clean and after it has
cooled down.
During longer periods of non-use we recom-
mend storing the appliance in its original pack-
aging.
Always store the appliance in a well-ventilated
and dry place out of reach of children.
CAUTION: Risk of breakage!
Please note that the glass ceramic surface can
be damaged by heavy or falling objects.
Troubleshooting
• Devicedoesnotfunction,noindicationon
the display.
Remedy:
Check the mains connection.
Several warnings will sound after the ap-
pliance has been turned on and after the
cooking function has been selected.
Possible cause:
No cookware or unsuitable cookware was
placed onto the plate.
NOTE:
For safety reasons, the appliance will switch
to standby mode after about 30 seconds.
Remedy:
Put a pot on the hob that is suitable for induc-
tion hobs.
The hob suddenly switches off during op-
eration.
Possible cause:
The thermal cut-off is activated.
Remedy:
Disconnect the appliance from mains power
supply and let it cool down for approx. 20 min-
utes. Then start operating the device again.
Cleaning
WARNING:
Always remove the mains lead before cleaning!
Wait until the machine has cooled down completely!
Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or re.